There are several types and dozens of brands of audio cables. The choice depends on what one wants to hook up and how concerned one is about sound quality. Generally speaking, 5-7% of the total system cost is considered adequate to be invested in cables. If one’s just listening to background music, news shows, etc., or if sound quality isn’t all that important, one can use practically any cable - even the cheap ones that come packaged with many audio components.
People who are more keenly interested in higher sound quality have more options. Cable specialists have products designed for increased quality and durability. Some of these cables can cost as much as five hundred dollars or more. While many people have trouble telling the difference between sound coming through the most expensive cables and through ordinary cables, there is an elite that believes that no price is too high when it comes to owning the very best equipment for the ultimate audio experience.
The basic purpose of a cable is to transfer the signal from point A to point B unadulterated. At audio frequencies the goal is to minimize losses by controlling the amount of Resistance, Inductance and Capacitance. There are four basic kinds of cables that one can use which are analog audio cables, audio video cables, audio speaker cable and digital cables.
To pass analogue line level audio signal between componets, RCA connections are employed. RCA audio cables are joined in stereo couples, with a connection for the right channel and one for the right channel of audio. For line level analogue connections it is a good idea to employ cables which have low capacitance and properly shielded to avoid interferences and external noises from getting to mix to the signal.
The most important cables are video cables as very high frequency signals travel through them. Audio video cables provide proper impedance, adequate shielding and solid terminations found with high frequency, and the right type of cable can be critical. So the shielding and maintenance of the proper characteristic impedance need to be aspects of a video cable.
Audio speaker cables are normally quite thick and have two wires: they may be tipped using spade lugs, banana plug or simply bare wires. It is required to be sure that the connections are really tight to the amplifier and the loudspeakers to reduce contact resistance to a minimum. You should never forget to keep the speaker cables as short as possible and avoid looping cables too much since this may augment cable inductance slightly.
Digital audio cables are a special group of their own. Of these there are two types: coaxial and optical. Coaxial digitals look just like standard analogs, but transfer digital audio rather than analog, while optical cables use light as a transmission method for audio signals. These types are also usually a single cable, where analog types are generally double plugs to stereo sound.
Although there are many types of audio cables, expensive ones are not necessary if listening to background music and radio broadcasts etc. The job of the cable is to pass the signal from source to output minimizing any interference. Paired RCA cables, preferably low in capacitance and resistance should be used for line level analog interconnects. Audio video cables should have adequate shielding as a high frequency signal is used. Audio speaker cable needs to be secured tightly to ensure low contact resistance. Special digital cables are available namely, coaxial and optical which transmit light pulses and digital signals respectively.